|
Services supported by QuickFox.net
- NickServ - Nickname management service.
- ChanServ - Channel managment service.
- MemoServ - Memo management service.
- BotServ - Bot management service.
- IMServ - Instant Messaging gateway service.
- SLServ - Second life gateway service.
BotServ:
BotServ allows you to have a bot on your own channel.
It has been created for users that can't host or
configure a bot, or for use on networks that don't
allow users' bot. Available commands are listed
below; to use them, type /msg BotServ command. For
more information on a specific command, type /msg
BotServ HELP command.
BOTLIST Lists available bots
ASSIGN Assigns a bot to a channel
SET Configures bot options
KICK Configures kickers
BADWORDS Maintains bad words list
Other commands: ACT INFO SAY UNASSIGN
Bot will join a channel whenever there is at least
1 user(s) on it.
Syntax: BOTLIST
Lists all available bots on this network.
Syntax: ASSIGN chan nick
Assigns a bot pointed out by nick to the channel chan. You
can then configure the bot for the channel so it fits
your needs.
Syntax: SET channel option parameters
Configures bot options. option can be one of:
DONTKICKOPS To protect ops against bot kicks
DONTKICKVOICES To protect voices against bot kicks
GREET Enable greet messages
FANTASY Enable fantaisist commands
SYMBIOSIS Allow the bot to act as a real bot
Type /msg BotServ HELP SET option for more information
on a specific option.
Note: access to this command is controlled by the
level SET.
Syntax: SET channel DONTKICKOPS {ON|OFF}
Enables or disables ops protection mode on a channel.
When it is enabled, ops won't be kicked by the bot
even if they don't match the NOKICK level.
Syntax: SET channel DONTKICKVOICES {ON|OFF}
Enables or disables voices protection mode on a channel.
When it is enabled, voices won't be kicked by the bot
even if they don't match the NOKICK level.
Syntax: SET channel GREET {ON|OFF}
Enables or disables greet mode on a channel.
When it is enabled, the bot will display greet
messages of users joining the channel, provided
they have enough access to the channel.
Syntax: SET channel FANTASY {ON|OFF}
Enables or disables fantasy mode on a channel.
When it is enabled, users will be able to use
commands !op, !deop, !voice, !devoice,
!kick, !kb, !unban, !seen on a channel (find how
to use them; try with or without nick for each,
and with a reason for some?).
Note that users wanting to use fantaisist
commands MUST have enough level for both
the FANTASIA and another level depending
of the command if required (for example, to use
!op, user must have enough access for the OPDEOP
level).
Syntax: SET channel SYMBIOSIS {ON|OFF}
Enables or disables symbiosis mode on a channel.
When it is enabled, the bot will do everything
normally done by ChanServ on channels, such as MODEs,
KICKs, and even the entry message.
Syntax: KICK channel option parameters
Configures bot kickers. option can be one of:
BOLDS Sets if the bot kicks bolds
BADWORDS Sets if the bot kicks bad words
CAPS Sets if the bot kicks caps
COLORS Sets if the bot kicks colors
FLOOD Sets if the bot kicks flooding users
REPEAT Sets if the bot kicks users who repeat
themselves
REVERSES Sets if the bot kicks reverses
UNDERLINES Sets if the bot kicks underlines
Type /msg BotServ HELP KICK option for more information
on a specific option.
Note: access to this command is controlled by the
level SET.
Syntax: KICK channel BOLDS {ON|OFF} [ttb]
Sets the bolds kicker on or off. When enabled, this
option tells the bot to kick users who use bolds.
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK #channel BADWORDS {ON|OFF} [ttb]
Sets the bad words kicker on or off. When enabled, this
option tells the bot to kick users who say certain words
on the channels.
You can define bad words for your channel using the
BADWORDS command. Type /msg BotServ HELP BADWORDS for
more information.
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK channel CAPS {ON|OFF} [ttb [min [percent]]]
Sets the caps kicker on or off. When enabled, this
option tells the bot to kick users who are talking in
CAPS.
The bot kicks only if there are at least min caps
and they constitute at least percent% of the total
text line (if not given, it defaults to 10 characters
and 25%).
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK channel COLORS {ON|OFF} [ttb]
Sets the colors kicker on or off. When enabled, this
option tells the bot to kick users who use colors.
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK channel FLOOD {ON|OFF} [ttb [ln [secs]]]
Sets the flood kicker on or off. When enabled, this
option tells the bot to kick users who are flooding
the channel using at least ln lines in secs seconds
(if not given, it defaults to 6 lines in 10 seconds).
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK #channel REPEAT {ON|OFF} [ttb [num]]
Sets the repeat kicker on or off. When enabled, this
option tells the bot to kick users who are repeating
themselves num times (if num is not given, it
defaults to 3).
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK channel REVERSES {ON|OFF} [ttb]
Sets the reverses kicker on or off. When enabled, this
option tells the bot to kick users who use reverses.
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: KICK channel UNDERLINES {ON|OFF} [ttb]
Sets the underlines kicker on or off. When enabled, this
option tells the bot to kick users who use underlines.
ttb is the number of times an user can be kicked
before it get banned. Don't give ttb to disable
the ban system once activated.
Syntax: BADWORDS channel ADD word [SINGLE | START | END]
BADWORDS channel DEL {word | entry-num | list}
BADWORDS channel LIST [mask | list]
BADWORDS channel CLEAR
Maintains the bad words list for a channel. The bad
words list determines which words are to be kicked
when the bad words kicker is enabled. For more information,
type /msg BotServ HELP KICK BADWORDS.
The BADWORDS ADD command adds the given word to the
badword list. If SINGLE is specified, a kick will be
done only if an user says the entire word. If START is
specified, a kick will be done if an user says a word
that starts with word. If END is specified, a kick
will be done if an user says a word that ends with
word. If you don't specify anything, a kick will
be issued every time word is said by an user.
The BADWORDS DEL command removes the given word from the
bad words list. If a list of entry numbers is given, those
entries are deleted. (See the example for LIST below.)
The BADWORDS LIST command displays the bad words list. If
a wildcard mask is given, only those entries matching the
mask are displayed. If a list of entry numbers is given,
only those entries are shown; for example:
BADWORDS #channel LIST 2-5,7-9
Lists bad words entries numbered 2 through 5 and
7 through 9.
The BADWORDS CLEAR command clears all entries of the
bad words list.
Syntax: ACT channel text
Makes the bot do the equivalent of a "/me" command
on the given channel using the given text.
Syntax: INFO {chan | nick}
Allows you to see BotServ information about a channel or a bot.
If the parameter is a channel, then you'll get information
such as enabled kickers. If the parameter is a nick,
you'll get information about a bot, such as creation
time or number of channels it is on.
Syntax: UNASSIGN chan
Unassigns a bot from a channel. When you use this command,
the bot won't join the channel anymore. However, bot
configuration for the channel is kept, so you will always
be able to reassign a bot later without have to reconfigure
it entirely.
|
|
|
